Function xensiv_pasco2_set_measurement_rate(const xensiv_pasco2_t *, uint16_t)

• Defined in File xensiv_pasco2.h

Function Documentation

int32_t xensiv_pasco2_set_measurement_rate(const xensiv_pasco2_t *dev, uint16_t val)

Sets the measurement rate for continuos mode.

Parameters

• dev – [in] Pointer to the XENSIV™ PAS CO2 sensor device

• val – [in] New measurement rate to apply [5-4095s]

Returns

XENSIV_PASCO2_OK if setting the measurement rate was successful; an error indicating what went wrong otherwise